BGS tools company, said in the BGS high carbohydrate drill design key features make this product can not only in the standard carbide drill on the application of the benefits, but also can provide other high-performance bit. Every feature of BGS high carbohydrate drilling RIGS is unique design to solve common problems during high production drilling.

The stability of the two-edge design and penetration capability of point geometry allows high-carb drilling to meet demanding applications, usually requiring fewer operational parameters or two steps.

Second margin high in carbohydrates rig has polishing effect, while the flute effectively control chip, and transportation enable bit in high production environment provide superior surface coating and pore size, thereby saving the cycle time, avoided in many applications to the need of reaming.

Secondary flutes provide a cooling channel, usually not in the training of external coolant. This is a combination of tool coating and high strength edge design, which increases the operating parameters and increases the service life of the cutter.

Investment in traditional deep hole drilling RIGS can be very expensive. MK, a member of the Suhner group, now offers custom deep hole drilling solutions that can drill up to 12 millimeters of diamonds, up to 100 times the diameter. These modules can be integrated directly into transmission machines, dedicated machines or traditional machines, such as rotary machines.

MK has invested a lot of research and development time and capital resources in recent years to develop its deep hole drilling technology, according to company sources.

Now MK can provide “zhou fei” components. Thanks to the modular concept of components, MK can provide customized turnkey, small and economical deep hole drilling RIGS.

MK often tests with actual tools and materials to demonstrate the design and performance of its customized deep hole drilling solution. Test in the factory and use specific production tools in actual production conditions. MK USES a single edge cutting edge and a hard alloy spiral drill with a diameter of 70x. Using this approach, MK can stand behind the design and performance to provide practical and realistic results for customers. The deep hole drilling process usually requires a drill pipe with a diameter of 1.5 times diameter or drill bit, and then a deep hole drilling process.

留下评论

电子邮件地址不会被公开。 必填项已用*标注